XtremeMind.com

whitelotus

Hello!

I want to know how exactly I should connect a pc sound card to a power wand so that I can run a frequency generator software to power the crystal.
And I am an electronics noob.

I figured out the following and I want to know if it is the right way-

1)Cut off the ear pieces from a headphone jack. A headphone jack is the standard 3.5mm stereo jack with 2 insulated wires I assume.

2)To one wire connect one end of a resistor( 8ohms).

3)Connect other end of the resistor to a mobius lead.

4)Connect the other mobius lead to the other wire from the jack.

5)stereo jack can be used now directly to the sound output socket on the pc and the nch tone generator run.

Is this right? Sorry if it is over detailed.I just dont wanna burn out my sound card.

Thank you Smile

Amrutha

maxan · Posted: Mon Dec 12, 2011 7:11 am Post subject:

Easy way.

Get a long stereo wire. Cut it. Connect a mobious loop... The continuous kind to the wire, making sure that you have a 1/4 watt, 1khm resistor.

Play nchtoner.

Keep the assembly far from the pc. This is pure scalar field which will cause your electricals to go nuts.

There very little use for scalar fields. It isn't energizing. Nor is it usable by the body. Scalar fields have one purpose in this field. To push chi.

So you should encase all that in high quality orgonite or sacred geometry.

Otherwise you are wasting your time
_________________
Show me da money.

I love Jon Logan's stuff!!

Tye · Posted: Thu Dec 15, 2011 3:16 am Post subject:

Word of warning. Scalar fields on its own can damage you big time. As Max says, they must be encased.
_________________
The Store of God
MyWeapons: RAD5, RAD2400, RAD200, URADX,URADX2,PsychoTronic Pro, Nova, Shiva, LPOG 2400. Anyone messes with me.... Smile

Richard McBeef · Posted: Thu Dec 15, 2011 3:25 am Post subject:

whitelotus- The method you described with the earphones is the one I use. Good luck, and enjoy.

Darkblade · Posted: Sun Dec 18, 2011 10:21 pm Post subject:

Richard! What type of loop do you use? Single node, double or continuous.

I've often refrained from the last because it gave me a headache
_________________

Richard McBeef · Posted: Fri Dec 23, 2011 5:19 am Post subject:

whitelotus · Posted: Mon Jan 09, 2012 6:30 am Post subject:

Thank you very much Maxan, tye and Richard.
Sorry for the late reply.

@Tye: I am enclosing it in Logan's Field pulser.To use as a orgone generator.I hope thats fine.