XtremeMind.com

[j_logan]

Mobius Coils and Radionics by Jon Logan___________________________________________________

Mobius Coils are generally thought to be named after mobius strips, an object that has only one side and one edge. Perhaps the coils are named after the Mobius Transformation in mathematics. Both the shape and the mathematical transformation were named after August Ferdinand Möbius (1790–1868), a German mathematician and theoretical astronomer. Mobius was a professor at the University of Leipzig. You can make a mobius strip from a strip of paper, by giving one end a flip (half rotation) and then joining the ends together.

People have reportedly been using Mobius Coils in electronics research since as early as the 1930’s. Some early versions of this coil were made from single strands of wire wound in an eccentric pattern on a toroidal path. These coils produced electrical and magnetic anomalies under some circumstances.

The Mobius Strip is a shape that folds back on itself. It would ordinarily have 2 sides and 4 edges, if it were a normal strip of paper. But when folded back on itself correctly, the sides and edges join together in such a way that they cancel each other out, and the resulting shape demonstrably has only one side and one edge. Early mobius coils and some modern versions mimic this shape in their winding pattern. The coil is wound from insulated wire in such a way that the finished coil forms a shape reminiscent of a mobius strip. This shape is essentially a closed loop with a half twist in the loop somewhere along the circumference.

There are several modern winding patterns currently being used which are referred to as Mobius Coils, and of course there are similarities and differences between them. The most important similarity as applied to Radionics is that they act as scalar antennae and therefore can be used to broadcast, receive, or amplify scalar wave patterns and effects.

It has been known for decades that scalar energy is intrinsic to Radionics, and affords a scientific comprehensibility to many of the ‘anomalous’ functions of Radionic devices, including their well documented ability to produce effects irrespective of distance. Scalar energy interfaces between 3D and 4D It transcends space-time as the established laws of physics conceive of space-time.

In alternative energy research, scalar energy is explored because of its capacity to draw energy from Aether and convert it into lower forms of energy such as heat, light, and electromagnetism, thus producing the appearance of ‘free’ energy.

More recently in Radionics, scalar energy is intelligently utilized because of its capacity to affect and direct lower forms of energy such as bioenergy and electromagnetism.

Many contemporary Mobius Coil designs are made from a series multi-filar cable with a helical twist. Most are made from copper wire, but any conductive metal will work. The wire has to be insulated.

In the early version of the Mobius Coil, made from single strands of wire, the winding pattern produced a spot where the wires would fold back over themselves, their magnetic fields intersecting at a tangent. It was this spot on the coil, the spot where the wires crossed over each other and formed a ‘knot’ or ‘node’ (analogous to the twist in a mobius strip) that produced the scalar effects associated with the coil.

In Simple terms, scalar waves are formed when two magnetic fields collide head-on or intersect at 90 degrees in such a way as to cancel each other out. One simple method of generating scalar pulses is a ‘zip strip’, a length of 2 conductor wire with the wires connected at one end. They form a loop antenna. If a pulsed electrical current is put through this antenna, it will generate small scalar effects from the magnetic field cancellation. At the center of the length of 2 conductor speaker wire is where the fields cancel each other out, and where the scalar effects are manifest.

Modern mobius coils with helical cable generate scalar waves more efficiently because the loop described above is twisted into a tightly spiraled cable. If the degree of the twist in the cable is close to 45 degrees, then the whole length of the loop antenna is folded back over itself at about 90 degrees. When a pulsed current is put through this cable, it will create a magnetic field around the wires forming the winding. Then the magnetic fields around the wires will intersect at 90 degrees and cancel out. This generates scalar effects along the whole length of the windings instead of only a small ‘hot spot’ on the coil. It also modulates the scalar emissions produced with the signal used to drive the coil.

You can form a Mobius Cable by taking a few tens of feet of insulated wire, folding it in half lengthwise once or twice, and looping the end without the leads over a suitable projection. Twist the cable with an electric drill until the spiral angle is close to 45 degrees. You can now form any number of different 3-dimensional winding patterns for coils from this cable, and all will demonstrate some degree of scalar effects. This allows for much greater simplicity of construction than the early models made from single strands of wire. It also allows for much more powerful coils in terms of scalar output, since virtually all of the wire in the coil is put to work canceling magnetic fields to produce scalar emissions.

In the ‘’zip strip’ scalar antenna, no matter how long the wire is, only a few minute fractions of an inch of the wire is actually put to work converting magnetic field into scalar emissions. In mobius coils made from single, non-twisted strands of wire, only the sections of wire crossing through the node are put to work generating scalar emissions.

But in a length of Mobius Cable, most of the wire in the cable is put to work generating scalar emissions. If this cable is then wound into a coil with a ‘mobius’ winding pattern, the resulting coil is many times more efficient as a scalar antenna than any of the others mentioned so far in this article.

A small device known as an SP (“Succor Punch”, Don Croft circa 2000, public domain) is becoming more common in Radionic circles, and for good reason. While in many ways a very primitive Radionics device, it is impressively powerful as an energy transmitter. Essentially, the SP class of devices are a mobius coil variant of some kind with a quartz core. Most of the devices made to date have used natural quartz crystals as the core object for the mobius coil. Quartz naturally acts to convert scalar energy to Orgone or Bioenergy. When you mate a low power scalar generating coil to a quartz core, you get a rude but relatively strong Radionic broadcaster. SPs are impressively strong in proportion to the complexity of their construction.
Early Radionics devices produced bioenergy effects, and produced scalar effects, but often without understanding the significance of scalar energy in relation to Radionics as a whole. Many Radionic transmitting devices are wired in such a way as to produce scalar emissions, but not of the same intensity as a properly constructed mobius coil. They generate scalar effects, but often as a side effect rather than a consciously engineered feature of the device.

Many Radionic machines built to date have been essentially very good tuning circuits that also serve as their own antenna. Therefore, the broadcast strength of such machines is proportionate to the efficiency at which the tuning circuit will double as a broadcast antenna. If the circuit is constructed primarily to be a tuning circuit, then its antenna characteristics will likely have been an unintentional but crucial side effect. The addition of a broadcast antenna such as a scalar generating coil removes this limitation and markedly increases the applicable power of the Radionics device.

More recently, Radionics manufacturers have begun the incorporation of scalar technology into their devices, and it is no surprise that many of these newer machines outperform older designs. When the tuning circuit is connected to an actual output device, the broadcast can be made tens or even thousands of times stronger. Think in terms of the difference between a crystal radio with the little earplug and a normal desktop radio with amplified speakers.

If the scalar wave patterns are the audio information driving the speaker, then the bioenergy or Orgone energy is analogous to the volume. Scalar waves carry Radionic data, and bioenergy or Orgone energy applies the Radionic data and does the work that produces effects in 3D and 4D.

Previously, decent Radionic ‘speakers’ were more difficult to construct because they tended to rely on precise geometry, expensive materials or complex electronics to generate their bioenergy and scalar effects. Mobius coils offer a simple and powerful method of constructing scalar-driven Radionic ‘speakers’, especially when combined with Orgone matrix material. Orgone matrix material releases bioenergy when bombarded by scalar waves. So does quartz. In both cases, the Orgone released is encoded with the Radionic data carried by the signal driving the coil.

In the case of the SP, the Radionic coding effect is largely ignored, as there is no tuning circuit, just a signal generator putting out a square wave in the millivolt range, usually at around 15Hz or around 32KHz. Small Zapper circuits similar to those developed by Hulda Clark for blood electrification are generally used to drive the mobius coil of an SP. Since there is no witness well or tuner, the Radionic input for the SP is just by hand contact with the device, and it relies on mental discipline to produce consistent results. However, even the simple SP device is a marked improvement in terms of applicable power output over many traditional Radionics devices. And, to be honest, the succor punch has another advantage despite its limitations... it is generally perceived as a ‘fun’ kind of tool to play with, which is certainly not something you can always say about black box machines with some dials and a switch or two. The rapport between the quartz / mobius combo and the person holding it is relatively strong due to resonance between the device and the users personal energy fields, making it reasonably responsive with only a little practice. Certainly a step up from many of the traditional Orgone beamer or wand designs I have seen. A succor punch may not be a music box, but it is a boom box. It is an interesting first of it’s kind device, and a usable proof of concept tool with regard to mobius coils in Radionics engineering.

More complex devices are now built using mobius coils which allow for audio input, and act to transcribe almost any audio signal into an Orgone-boosted Radionic broadcast with relative ease and efficiency. Others are incorporated into traditional or computer-assisted Radionics tuners. Future articles will explore this relationship between scalar energy, Orgone energy, and Radionics further. In the meantime, you can find instructions for winding several mobius coil variants by doing a google search with the keywords “mobius coil”, or at http://www.littlemountainsmudge.com/info.htm
©2005 Jon Logan
_________________
orgone / radionics DIY and products
http://www.littlemountainsmudge.com