XtremeMind.com

Jobet · Posted: Thu Jul 23, 2009 4:39 pm Post subject: My new project

Hey guys.

Yeah long time I know, you can say I endeavored to get good at other things, among which, Music Production Very Happy

. I just set up a new recording studio and having noooo partner to influence any artistic or business decision, I'm having a blast !

Anyway, some local folks came to me and, well, re-awakened my drive to make new things. So here's my new baby.

It's an old, junked Compaq 5150 desktop. Talk about old, its like, made for Windows 98 and all. AMD K6 Processor, 128MB of RAM at PC-100 (ouch talk about old!). I have two more Duron type junk PC's that I'm putting together from old, shelved parts as well.

Okay I can hear your mental voices. WTF is Jobet talking about? How could an old computer resurrection project ever belong in the xtrememind psionics board ?

Well...here's how :

This old baby has now resurrected to become a dedicated Computer-based Psionics workstation. I took one of the spare Python cores lying around in my shop and created a simple Bedini-type scalar generator using, of all things, a cooling fan from another junk PC and rigged that up. It's runnin Cyber-Shaman 7 and a host of other energy-related stuff. I'm still reading the manual of Cyber-Shaman 8 to see if there's any significant difference, other than the absence of Welz trend cards Very Happy

.

There's not much space in the case of this one to put in the entire Python circuitry, but what I was able to do was to put in secondary windings so this core functions both as a Python and an energy Dialyzer machine, so I can do remote healing work.

Speaking of which, I want to run the remote healing capabilities of this baby through its paces. If anyone of you or your loved ones is sick, send the picture and details (or even if no details if you want) to me at jobet@xtrememind.com or at jobet_claudio(at)yahoo.com . I'll take five cases within the next 30 days. My one and only energy dialyzer prototype unit was (insistently) purchased from me and I haven't been able to make another one since, till recently.

Feel free to feel up the 2nd picture. The unit is powered most of the time doing stuff and helping friends,and when it's not, the residual charge of the core along with its quasi-active generation properties will still make for a grand "feel".

Comments are welcome.

herzog · Posted: Thu Jul 23, 2009 5:05 pm Post subject:

That reminds me of that tower PC joey converted into a rad station. He filled the drive bays with chi cores and made the OS run off Win98 or something with CS5. Im hazy on the details, except that it was a 1Ghz slowpoke with 1Gb ram. Who bought it again? I think it was the guy who gets boners all the time....

rocknboners? Very Happy

Is this same config?
_________________
Sono caldo. Mi piace donna!

Vortex · Posted: Thu Jul 23, 2009 5:30 pm Post subject:

Nice. I had the same idea for a while, but never got around to it.

How are the cores hooked up? To the power output of the PSU, the soundcard, both?
_________________
Yes, my avatar is a real photograph.

rocknroll · Posted: Thu Jul 23, 2009 7:21 pm Post subject:

With such a powerful core, doesn't it affect the hard disk with all that energy in its vicinity?

Do depressed folks qualify for the trial?

I am not the guy in case you meant so. @herzog. There was another dude or two who first experienced it with extreme effects. he no longer hangs around here.

Mr. GreenTea · Posted: Thu Jul 23, 2009 8:16 pm Post subject:

I've got some questions Jobet.

If the addition is based on a Bendine-type scalar generator, where is the driver magnet located?
Where are the bucking magnets located?
How is the the beam generated?
What vector or along what axis does the 'beam" fire along?
Where are the windings and what do they do?
How well shielded are the other components, and/or do you have problems with crosstalk, especially from the soundcard?
[assuming of course that you are using the soundcard]

I built my Last Foodtainer along the lines of a Bendini-type scalar generator. The only windings on the foodtainer are a unpowered Caduceus Coil. The foodtainer sits well away from computer equipment (for reasons noted in the post), but I am not sure I could have it near my computers as there is enough current to power up the Caduceus Coil through inductance.

I'd like to see how this works out. I've a spare laptop, and while I'm not big on powered machines, I am interested in whether or not you can custom design an express 34/54 interface or possibly a USB interface to connect to a MiniMe or organite core. While I know that there is a phono type plug for the MM, that treats the device as essentially a binary device. Are there not more programming possibilities?
_________________
Quotes ≠ Knowledge.
Doing brings Knowledge!
Right ≠ number of believers.
Results show Rightness or Wrongness.
Quoting others ≠ being right even if they are!
---------------------------------------------

---------------------------------------------

Jobet · Posted: Thu Jul 23, 2009 11:45 pm Post subject:

I was not able to use the full Bedini generator because the Python core was already set. What I took advantage of was the "brush noise" which are to enter the scalar coils in the core and provide the disruption in voltge and current. Main scalar generation is through the use of coils although there are...ugh...too much detail Very Happy

.

Vector of transmission is centered along the vertical axis of the crystal.

How is the beam generated- classified Very Happy

Where are the windings- If you meant the scalar coil windings, they're inside the core of course.

Shielding and Crosstalk- no problem so far.

Jobet · Posted: Thu Jul 23, 2009 11:51 pm Post subject:

Jobet · Posted: Fri Jul 24, 2009 9:47 am Post subject:

Vortex · Posted: Fri Jul 24, 2009 1:34 pm Post subject:

Jobet · Posted: Sat Jul 25, 2009 4:37 am Post subject:

Jobet · Posted: Sun Aug 02, 2009 4:45 pm Post subject:

Here. It's totally finished even the "analog" portion is done.

Those knobs are actually for the dialyzer. The plug goes to the external stickplate. The "clip" is actually the witness clip.

Nice thing about this setup is that I can use the dialyzer circuit's knobs to dowse for the "rates" that are required by some radionics programs. How cool. Two in one. The stick pad now sits beside the mouse. After all, it gets a lot of use when operating the rad workstation Very Happy

Bandit795 · Posted: Tue Aug 04, 2009 3:57 am Post subject:

Wow!!! Finally a new dialyzer

I'm interested to see how it will work on the targets whose info will be mailed to you Jobet. I'm in perfect health though...

Jobet · Posted: Tue Aug 04, 2009 4:46 am Post subject:

Bandit795 · Posted: Thu Aug 06, 2009 12:13 am Post subject:

Well I hope it does work indeed on the cancer patient...

And I take my words back on being 100% healthy.. I woke up with a slight sore throat this morning online to find out this afternoon that a colleague of mine (who thought she had a slight cold or flu for several days already) tested positive for H1N1.